Giảm giá!

VESSEL Cushion Drill Long ACD3.5L for Concrete MW3711650

Giá gốc là: 2 ₫.Giá hiện tại là: 1 ₫.

Thương hiệu:
VESSEL
Công nghệ:
Nhật Bản
Mã hàng:
Barcode
Xuất xứ:
Chính hãng
Bảo hành:
Now

✓ VESSEL Cushion Drill Long ACD3.5L for Concrete MW3711650 (Chính hãng , Giá tốt, Uy tín , Chất lượng, Giao hàng nhanh 1h)

Danh mục: , Thương hiệu:

Mô tả

Thiết bị sản phẩm uy tín, giúp hoàn thành nhanh tiến độ công việc với mức giá tốt trong phân khúc – đó chính là ưu điểm nổi bật của VESSEL Cushion Drill Long ACD3.5L for Concrete MW3711650. Được sản xuất bởi một nhà máy có quy mô lớn và chuyên nghiệp, VESSEL Cushion Drill Long ACD3.5L for Concrete MW3711650 được tạo ra trong môi trường kiểm soát chặt chẽ từ đầu vào đến đầu ra. Tại đây, phòng thí nghiệm công nghiệp hiện đại phối hợp cùng hệ thống cảm biến lực chính xác để đánh giá hiệu suất từng linh kiện. Quy trình lắp ráp tự động đảm bảo độ đồng đều và giảm thiểu sai sót, trong khi hướng dẫn thực hành sản xuất tốt (GMP) được tuân thủ nghiêm ngặt tại mọi khâu. Các kỹ thuật viên thao tác trên bàn làm việc tiêu chuẩn, tiến hành kiểm tra đầu ra kỹ lưỡng trước khi sản phẩm rời nhà máy. Nhờ hệ thống kiểm định sản phẩm toàn diện, VESSEL Cushion Drill Long ACD3.5L for Concrete MW3711650 không chỉ đáp ứng yêu cầu kỹ thuật mà còn mang lại hiệu quả cao cho người dùng, xứng đáng là lựa chọn hàng đầu trong phân khúc giá tốt.[xsub old=”San-pham-ABC” new=”vessel-cushion-drill-long-acd35l-for-concrete-mw3711650″ nth=”0″][substitute old=”Sản phẩm ABC” new=”VESSEL Cushion Drill Long ACD3.5L for Concrete MW3711650″ nth=”0″]

VESSEL Cushion Drill Long ACD3.5L for Concrete MW3711650
VESSEL Cushion Drill Long ACD3.5L for Concrete MW3711650

Thông số kỹ thuật và Thông tin sản phẩm

It is suitable for drilling holes in mortar, blocks, bricks, ALC, gypsum board, etc., and for inserting plug anchors and drilling pilot holes for plugless screws.
No hammer drill needed. You can drill holes with a rechargeable impact.
Asymmetric special carbide tip shape. Cutting speed is more than four times faster than that of general shapes.
Made of chrome molybdenum steel that can withstand high loads. The cutting edge and hexagonal shaft are machined as one piece.
Materials to be cut: concrete, mortar, blocks, bricks, ALC, gypsum board.
Specifications in detailRing color: Red
Blade diameter (mm): 3.5
Effective length (mm): 95
Total length (mm): 152
Shank shape: Hexagonal shaft (6.35 mm)
Shank diameter (mm): 6.35
Compatible models: Air screwdriver (opposite side 6.35 mm), rechargeable/electric screwdriver
VESSEL ACD-3.5L[ref_block id=”productxyz-h6-113″]
[ref_block id=”pic-image123-150″]
[ref_block id=”productxyz-h6-0003″][ref_block id=”productxyz-h16-110″]
[ref_block id=”pic-image123-206″]
[ref_block id=”productxyz-h16-0005″][ref_block id=”productxyz-h26-119″]
[ref_block id=”pic-image123-129″]
[ref_block id=”productxyz-h26-0034″]

>>> Xem thêm: Ổ Cắm Điện, Thiết Bị Đo Điện, Găng Tay Bảo Hộ Hàn, Máy Khoan Gỗ, Bộ Khoan Mini, Bơm Mỡ, MÁY HÚT BỤI THẲNG ĐỨNG DÙNG PIN

[ref_block id=”productxyz-h27-103″]
[ref_block id=”pic-image123-112″]
[ref_block id=”productxyz-h27-0014″][ref_block id=”productxyz-w2-119″]
[ref_block id=”pic-image123-154″]
[ref_block id=”productxyz-w2-0030″][ref_block id=”productxyz-w3-115″]
[ref_block id=”pic-image123-177″]
[ref_block id=”productxyz-w3-0012″]

Sản phẩm tổng hợp, VESSEL, Đại lý VESSEL, Đại lý VESSEL

[ref_block id=”productxyz-h14-105″]
[ref_block id=”pic-image123-243″]
[ref_block id=”productxyz-h14-0023″][ref_block id=”productxyz-h1-105″]
[ref_block id=”pic-image123-240″]
[ref_block id=”productxyz-h1-0034″]

>>> Dewalt Nghĩa Hành
>>> Dewalt Sơn Tây

>>> Xem thêm: Ổ Cắm Điện, Thiết Bị Đo Điện, Găng Tay Bảo Hộ Hàn, Máy Khoan Gỗ, Bộ Khoan Mini, Bơm Mỡ, MÁY HÚT BỤI THẲNG ĐỨNG DÙNG PIN

[ref_block id=”productxyz-h31-117″]
[ref_block id=”pic-image123-128″]
[ref_block id=”productxyz-h31-0009″]
✓ VESSEL Cushion Drill Long ACD3.5L for Concrete MW3711650

[/substitute] [/xsub]