Giảm giá!

VESSEL Air Driver GT-S6LXD MW3985318

Giá gốc là: 2 ₫.Giá hiện tại là: 1 ₫.

Thương hiệu:
VESSEL
Công nghệ:
Nhật Bản
Mã hàng:
Barcode
Xuất xứ:
Chính hãng
Bảo hành:
Now

✓ VESSEL Air Driver GT-S6LXD MW3985318 (Chính hãng , Giá tốt, Uy tín , Chất lượng, Giao hàng nhanh 1h)

Danh mục: , Thương hiệu:

Mô tả

Thiết bị, dụng cụ được thiết kế tinh gọn, mang lại hiệu suất công việc cao với mức giá chấp nhận được – đó chính là ưu điểm nổi bật của VESSEL Air Driver GT-S6LXD MW3985318. Được sản xuất tại cơ sở hiện đại, VESSEL Air Driver GT-S6LXD MW3985318 được tạo ra nhờ quy trình kiểm soát nghiêm ngặt từ khâu chọn lọc nguyên vật liệu đầu vào đến hoàn thiện sản phẩm. Nhà máy ứng dụng robot dẫn đường tự động (AGV) để vận chuyển linh kiện, kết hợp với hệ thống giá đỡ linh kiện thông minh, giúp tối ưu hóa dây chuyền và giảm thiểu sai sót. Quy trình kiểm tra nội bộ được thực hiện liên tục, bổ sung bởi các đợt kiểm tra ngẫu nhiên định kỳ để đảm bảo độ ổn định chất lượng. Đặc biệt, mỗi sản phẩm đều đi kèm giấy chứng nhận xuất xưởng rõ ràng, minh bạch. Bên cạnh đó, nhà sản xuất không ngừng đầu tư vào phát triển công nghệ lõi nhằm nâng cao tính năng và độ bền. Nhờ vậy, VESSEL Air Driver GT-S6LXD MW3985318 không chỉ nhỏ gọn, dễ sử dụng mà còn mang lại hiệu quả vượt trội trong tầm giá hợp lý.[xsub old=”San-pham-ABC” new=”vessel-air-driver-gt-s6lxd-mw3985318″ nth=”0″][substitute old=”Sản phẩm ABC” new=”VESSEL Air Driver GT-S6LXD MW3985318″ nth=”0″]

VESSEL Air Driver GT-S6LXD MW3985318
VESSEL Air Driver GT-S6LXD MW3985318

Thông số kỹ thuật và Thông tin sản phẩm

Oil-injected hammer reduces vibration and noise.
This high-power model is 20% more powerful than previous models, and boasts ample tightening power for 5mm tapping screws.
We conduct various tests based on the Ministry of Health, Labor and Welfare’s guidelines and guidelines regarding noise and vibration.
By injecting oil into the impact section, we have reduced noise and vibration and increased durability.
The use of aluminum in the air motor promotes weight reduction, and the easy-to-handle handle design reduces fatigue.
For various assembly lines for housing, refrigerators, TVs, bicycles, motorcycles, railway cars, pneumatic equipment, etc.
Specifications in detailAir pressure used: 0.6MPa
Straight Type
With silencer
Vibration value (m/s2): 12.47
Bit insertion hole (mm): 6.35
Capable screw dimensions (mm): 5 to 6
Maximum tightening torque (N・m): 48
No-load speed (min(-1)): 12000
Air consumption (m3/min): 0.4
Hose attachment port: G1/4
Exhaust: 360°
Total length (mm): 212
Air pressure used (MPa): 0.6
Noise level (dB): LpA/86.2 LwA/97.2
No-load speed (rpm): 12000
Chuck type: Bit sleeve type
VESSEL GT-S6LXD[ref_block id=”productxyz-h4-118″]
[ref_block id=”pic-image123-104″]
[ref_block id=”productxyz-h4-0001″][ref_block id=”productxyz-h16-108″]
[ref_block id=”pic-image123-235″]
[ref_block id=”productxyz-h16-0033″][ref_block id=”productxyz-h26-120″]
[ref_block id=”pic-image123-207″]
[ref_block id=”productxyz-h26-0034″]

>>> Xem thêm: Đo Điện Trở Đất, Máy Hút Bụi Mini, Pa Lăng Xích Kéo Tay, Máy Lọc Không Khí, Thuốc Hàn, Máy Vặn Vít Dùng Pin, MÁY HÚT BỤI

[ref_block id=”productxyz-h27-114″]
[ref_block id=”pic-image123-211″]
[ref_block id=”productxyz-h27-0004″][ref_block id=”productxyz-w2-110″]
[ref_block id=”pic-image123-140″]
[ref_block id=”productxyz-w2-0035″][ref_block id=”productxyz-w3-117″]
[ref_block id=”pic-image123-189″]
[ref_block id=”productxyz-w3-0013″]

Sản phẩm tổng hợp, VESSEL, Đại lý VESSEL, Đại lý VESSEL

[ref_block id=”productxyz-h10-101″]
[ref_block id=”pic-image123-127″]
[ref_block id=”productxyz-h10-0022″][ref_block id=”productxyz-h2-116″]
[ref_block id=”pic-image123-178″]
[ref_block id=”productxyz-h2-0023″]

>>> Dewalt Xuân Lộc Đồng Nai
>>> Dewalt Kim Bôi

>>> Xem thêm: Đo Điện Trở Đất, Máy Hút Bụi Mini, Pa Lăng Xích Kéo Tay, Máy Lọc Không Khí, Thuốc Hàn, Máy Vặn Vít Dùng Pin, MÁY HÚT BỤI

[ref_block id=”productxyz-h31-101″]
[ref_block id=”pic-image123-139″]
[ref_block id=”productxyz-h31-0002″]
✓ VESSEL Air Driver GT-S6LXD MW3985318

[/substitute] [/xsub]